70cm GS-23b Amplifier
by LZ2US
Click on callsign for e-mail.

Tube:  GS23B /4CX1600U/ SVETLANA
Freq:  432 MHz
Power output > 1500 watts
Power gain:  14-15 dB
       

Eff. 55% linear mode
220-240 volts
Size:  19x17x11 inches
Weight:  43Kg
  • Heater and High Voltage both "soft" start
  • High Voltage delay timer:  HV cannot turn on before the tube is ready
  • Cannot apply drive without HV: PA kept in STDBY (No operation is possible without HV)
  • HV plate line is fuse protected
  • The HV transformer protected by magnet circuit breaker (overcurrent breaker)
  • Control and screen grids are overcurrent protected (trip circuit)
  • Blower delay timer:  Blowers run after PA is off for better cooldown
  • Built-in coax relay sequencer:  Separate exciter & tower relay/preamp box outputs
  • Coax transfer relays (depends on the order - contact LZ2US to discuss)
  • Front & Top View


    Bottom of RF compartment


    Different look at Top View


    Rear Panel

    home LZ2US home home
    go to the top

    Best Viewed: MSIE 4.0 & higher, or Netscape 3.02 & higher, and screen set to 800x600 pixels
    Last Updated: 9 January 2001
    Feedback: Paul S. Goble, III, ND2X
    Copyright © 1998 - 2001 by ND2X, all rights reserved